|
Datasheet
|
ACT-818 Datasheet [PDF]
|
| Channel |
Single |
| Chassis |
EIA Standard 19" 1/2U |
| Receiving Mode |
Digital Diversity |
| Frequency Range |
UHF 480 – 960 MHz (country dependent) |
| Bandwidth |
64MHz |
| Channel Grid |
25 kHz
|
| Channel Set-up |
Scan & ACT sync |
| Audio Sampling |
24-bit / 44.1 kHz Rate |
| Audio Frequency Response |
20 Hz – 20 kHz |
| Encryption |
256 bit |
| Audio Compression |
2nd generation DSP inertial coding |
| Latency |
2.7 ms |
| S/N Ratio (analog output) |
> 115 dB(A) |
| T.H.D. |
< 0.03% @ 1 kHz |
| Sensitivity |
12 dBµV at S/N ≒ 118 dBA (digital output) |
| Image & Spurious Rejection |
> 85 dB |
| Audio Output |
Balanced XLR , Unbalanced 6.3 mm (1/4 ") |
| Analog Output Switch |
Mic / Line |
| Audio Interface |
AES digital output, analog transmission |
| Digital Equalizer |
10 built-in SmartEQ™ & 10 built-in digital anti-feedback SmartEQ™ |
| PC Interface |
USB or RS-232 interface. Proprietary MIPRO ACT-BUS |
| Display |
Full-color VFD |
| Battery Meter |
Transmitter battery status |
| Antenna Input |
2 × 50Ω TNC female connector. Detachable. 50Ω TNC female connector provides bias for the MIPRO antenna systems. |
| Power Supply |
External adaptor |
| Dimensions (W × H × D) |
210 × 44 × 230 mm | 8.3 × 1.7 × 9 " |
| Weight |
Approx. 1.1 kg | 2.4 lbs |
| Operating Temperature |
-10 – +60℃ |
| Note |
Refer to actual product in the event of product discrepancy.
Frequency range and maximum deviation comply with the regulations of different countries. |